Call Us 800-687-6202
FREE SHIPPING on orders over $99.97 | $8.99 for FedEx 2 Day Air
My Account |

Zero Tolerance 0562TI Knife Rick Hinderer EDC Flipper Folder Stonewash Titanium with KVT Opening

  • Zero Tolerance 0562TI Knife Rick Hinderer EDC Flipper Folder Stonewash Titanium with KVT Opening
Be the first one to write a reviewSKU: ZT-0562TI
$280.00 Retail $350.00  
Free Shipping
Optional Services / Add-onsWant it to shave? - $5.00
?

Knife is sharpened to a razor edge. This service is done on a 2" x 72" Burr King and finished on a Baldor buffer using a leather wheel. Blades are kept cool so overheating is not an issue. Please keep in mind that items that receive this service are non-refundable. If we make a mistake, please contact us and we will make it right.

 Laser Mark Your Knife - only $6.99
*add-ons can delay shipment 24-48 hours
Have Questions? Check out the Custom Mod and Add-On FAQ
Pin It

 

BRANDZero Tolerance Knives
PRODUCT TYPEKnives
PRODUCT CATEGORYFolding
OVERALL LENGTH8.3"
CLOSED LENGTH4.8"
BLADE LENGTH3.5"
BLADE STEELCPM 20CV
BLADE TYPEDrop Point
BLADE EDGEPlain
LOCKING MECHANISMFrame Lock
HANDLE MATERIALTitanium
CARRYTip-Up
OPENING MECHANISMFlipper
DESIGNERRick Hinderer
ORIGINUSA
WEIGHT5.3 oz.
BLADE FINISHStonewash, Satin
STEEL TYPEStainless Steel
MODEL0562TI

Zero Tolerance Knives: ZT 0562TI Knife, ZT-0562TI


The ZT 0562TI Knife - a collaboration between ZT and Rick Hinderer, is a beefy EDC that features a 3.5 inch drop point blade made of premium CPM 20CV stainless steel, .156 inch thick. The blade has the exclusive Hinderer "slicer" grind for cutting efficiency and tip strength, a two tone stonewash and machine satin finish, notched thumb ramp for secure grip, studs that lock up against the frame for superior strength against sideways torque, and a flipper for ambidextrous one hand opening. The stonewash titanium handle, 4.8 inches closed, has ergonomic finger grooves for comfort, pivot with KVT ball bearing opening system, sturdy titanium frame lock with hardened steel lockbar insert and stabilizer, and a side to side reversible deep carry pocket clip at the butt end. The Zero Tolerance 0562TI Knife has an overall open length of 8.3 inches, and it weighs 5.3 ounces. Proudly made in the USA.

From the ZT website: ... the 0562TI offers a premium CPM 20CV steel blade with Rick's exclusive Hinderer "slicer" grind. This blade grind gives you both slicing efficiency and a tough point. The 20CV powdered steel blade provides high wear resistance and corrosion resistance - enabling a hair-popping edge that lasts for a long time, even under hard use. For good looks, ZT gives the blade a stonewashed finish on the flats and a machine satin finish on the grinds.

The knife opens with a flipper and moves out of the handle on our smooth KVT ball-bearing opening system. KVT's "caged" ball bearings surround the pivot and make opening the knife nearly frictionless; just pull back on the flipper and add a roll of the wrist and the 0562TI is ready to go to work. For secure lock up during use, ZT uses a frame lock with hardened steel lockbar inserts and lockbar stabilization so the lock won't overextend. Machined pockets on the inside of the front handle scale relieve weight and make the big 0526TI easy to carry.


Zero Tolerance Knives: ZT 0562TI Knife, ZT-0562TI
KNIVES PLUS® HOME