Call Us 800-687-6202
FREE SHIPPING on orders over $99.97 | $8.99 for FedEx 2 Day Air

Spyderco C243PBK Endela Lightweight Knife - 3.41 Inch Drop Point, Black FRN Handle

  • Spyderco C243PBK Endela Lightweight Knife - 3.41 Inch Drop Point, Black FRN Handle
  • Spyderco C243PBK Endela Lightweight Knife - 3.41 Inch Drop Point, Black FRN Handle
  • Spyderco C243PBK Endela Lightweight Knife - 3.41 Inch Drop Point, Black FRN Handle
  • Spyderco C243PBK Endela Lightweight Knife - 3.41 Inch Drop Point, Black FRN Handle
  • Spyderco C243PBK Endela Lightweight Knife - 3.41 Inch Drop Point, Black FRN Handle
  • Spyderco C243PBK Endela Lightweight Knife - 3.41 Inch Drop Point, Black FRN Handle
Be the first one to write a reviewSKU: SP-C243PBK
$98.63
Optional Services / Add-onsWant it to shave? - $5.00
?

Knife is sharpened to a razor edge. This service is done on a 2" x 72" Burr King and finished on a Baldor buffer using a leather wheel. Blades are kept cool so overheating is not an issue. Please keep in mind that items that receive this service are non-refundable. If you feel we have made a mistake, please contact us and we will make it right.

Bronze Heat Colored Existing Hardware - $15.00
?

Bronze Heat Colored Hardware Add-On - The knife is disassembled and a small amount of heat is applied to the hardware to change it to a bronze color. This includes any screws, spacers, lanyard tubes, or clips that are satin. Acid stonewashed clips will not be heat colored.

         

        

Acid Stonewash Blade / Clip (Satin ONLY) - $25.00
?

Acid Stonewash Blade / Clip (Satin ONLY) Add-On - Blades and satin finished clips (not coated) are acid stonewashed. Wire clips cannot be acid stonewashed. Sharpening is included with this add-on. Please allow 10 business days for completion.

 Laser Mark Your Knife - only $8.99
*Add-ons will delay shipment by 24-48 hours and are non-refundable (excluding installations).
Have Questions? Check out the Custom Mod and Add-On FAQ
Pin It

 

BRANDSpyderco Knives
PRODUCT TYPEKnives
PRODUCT CATEGORYFolding
OVERALL LENGTH8.10"
CLOSED LENGTH4.69"
BLADE LENGTH3.41"
BLADE STEELVG-10
BLADE TYPEDrop Point
BLADE EDGEPlain
BLADE GRINDFlat
LOCKING MECHANISMLockback
HANDLE MATERIALFRN
CARRY4-Way
OPENING MECHANISMThumb Hole
ORIGINJapan
WEIGHT3.1 oz.
BLADE FINISHSatin
STEEL TYPEStainless Steel
MODELEndela

Spyderco Knives: Spyderco Endela Lightweight, SP-C243PBK


The C243PBK Spyderco Endela Knife is an EDC that perfectly bridges the gap between the classic Delica 4 and the Endura 4 Lightweight Models. This Endela features a 3.41 inch drop point blade made of VG-10 stainless steel, .118 inch thick, with a full flat grind, a notched choil and thumb ramp for secure grip, and the Spyderco hole for ambidextrous one hand opening. The black FRN (fiberglass reinforced nylon) handle, 4.69 inches closed, has Bi-Directional Texturing for secure purchase, skeletonized stainless steel liners, sturdy lockback, lanyard hole, and a side to side and end to end reversible pocket clip. The Spyderco Endela Knife has an overall open length of 8.10 inches and it weighs 3.1 ounces. Made in Japan.

From the Spyderco 2019 Reveal 2 Product Guide: Sized to literally split the difference between the iconic Endura® 4 and Delica® 4 Lightweights, the Endela offers all the highly refined, time-tested features of each in the perfect "in-between" format. Its full-flat-ground blade is crafted from VG-10 stainless steel and sports a fully accessible Trademark Round Hole for ambidextrous one-hand opening. Available with either a PlainEdge™ or SpyderEdge™, the blade is supported by a sturdy back lock mechanism, skeletonized stainless steel liners, and injection molded fiberglass-reinforced-nylon (FRN) scales. Spyderco's trademark Bi-Directional Texturing pattern ensures a non-slip grip and a four-position pocket clip offers a choice of tip-up or tip-down carry on both sides of the body.

Spyderco Knives: Spyderco Endela Lightweight, SP-C243PBK

KNIVES PLUS ® Home