Call Us 800-687-6202
FREE SHIPPING on orders over $99.97 | $8.99 for FedEx 2 Day Air
My Account |

Flytanium Custom Titanium Ball Cage Lock for Spyderco Manix 2 G10 Knife - Gold Anodized Finish

  • Flytanium Custom Titanium Ball Cage Lock for Spyderco Manix 2 G10 Knife - Gold Anodized Finish
Flytanium Custom Titanium Ball Cage Lock for Spyderco Manix 2 G10 Knife - Gold Anodized Finish
Average rating:
average rating 100%
2 reviews
Read all reviews
SKU: FLY-542G
$45.00
Optional Services / Add-ons
 Laser Mark Your Knife - only $8.99
Pin It

 

BRANDFlytanium
PRODUCT TYPEAccessories
PRODUCT CATEGORYReplacement Parts
HANDLE MATERIALTitanium
ORIGINChina
WEIGHT.08 oz.
BLADE FINISHGold
MODELManix 2

Flytanium Company: Flytanium Titanium Replacement Ball Cage Lock for Spyderco Manix 2 G10, Gold, FLY-389G


The FLY-389G Flytanium Titanium Ball Cage Lock is milled precisely for replacement of the factory plastic ball cage lock of the popular Spyderco Manix 2 G10 and Manix 2 G10 XL Knives. This high quality titanium lock has a gold anodized finish for personalization of your favorite everyday carry; weight is .08 ounce. Made in China.

From Flytanium: Titanium > Plastic! Replace your sad plastic ball cage lock with sturdy titanium from Flytanium. Our new titanium ball cage lock will fit both the Manix 2 and Manix 2 XL (but not the lightweight models due to pin construction). Full titanium construction means you can depend on your lock day after day, without worrying that little post might snap. ... This handy piece weighs in at just 0.08 oz.

Because each knife is slightly different, there is a break-in period when you install your new ball cage lock. Spend an afternoon playing with your knife, enjoying your new lock, and you'll be good to go!

Installation of the ball cage lock requires some basic tools and knowledge. You will need a high quality torx bit set to remove the screws and pivots. The pivot and lanyard tube can be tough to remove. There are some good informational videos on YouTube if you need more instructions ...

Disclaimer: There are many small parts and pieces on the Manix 2. It is NOT easy to take apart. Disassemble at your own risk.

Please Note: Spyderco's Warranty does not cover disassembly of any knife by any person other than Spyderco's Warranty department.


Flytanium Company: Flytanium Titanium Replacement Ball Cage Lock for Spyderco Manix 2 G10, Gold, FLY-389G

KNIVES PLUS ® Home

Flytanium Custom Titanium Ball Cage Lock for Spyderco Manix 2 G10 Knife - Gold Anodized Finish
Average rating:
average rating 100%
2 reviews

Write a review | Read all reviews

Featured Reviews:

Flytanium Custom Titanium Ball Cage Lock for Spyderco Manix 2 G10 Knife - Gold Anodized Finish
average rating 100%
Awesome
By 
The main thing that had discouraged me from purchasing the Manix 2 was the plastic ball cage. The rest of the knife felt fantastic, but the plastic cage always made it felt cheap and fragile. The Flytanium titanium ball cage is not too difficult to install(not easy, but manageable for anyone with reasonable proficiency) and the fit and finish are perfect. It looks and feels high quality. This cage has made my Manix 2 my favorite EDC knife.
Flytanium Custom Titanium Ball Cage Lock for Spyderco Manix 2 G10 Knife - Gold Anodized Finish
average rating 100%
Titanium Ball Cage
By 
Really like the Flytanium Titanium Ball Cage Lock for the Manix 2. The look much better than the stock ones. They are ,also, substantially stronger than the plastic ones. When installing, its a lot easier to leave the D shaped side in and taking out the front screw of the ball cage.They go in relatively easy.