KnivesPlus
Spyderco Ladybug 3 LBORP3E - Sprint Run - Serial Number - BNIB - 2016 - Reviews

Spyderco Ladybug 3 LBORP3E - Sprint Run - Serial Number - BNIB - 2016

average rating 100%
Great little knife 08/31/2017
By Jim G
The BEST keychain knife you can buy. The Hap40 steel takes it to another level. Very sharp out of the box. The burnt orange color is awesome. It's a Spyderco, buy it!
average rating 100%
Great down in the pocket knife 08/18/2017
By Derek Bergstrom
I got this knife to try out HAP40. It can cut up a lot of cardbord before it wont cut paper abymore and it strops back very easily. It is much thinner than the manbug, so if you like a good slicer this is the one. The lock is also stronger than i expected, i hit it on the spine a few times with a small stick and it didnt fold. I added a lanyard with a knot for a pinky purchase when holding. So far no rust even when sweaty from running. I wish i could post pictures. This steel is easy to sharpen and it pretty strong. I dug the edge into a knot and pried it out sideways and repeated it a lot with no damage. At 16 degrees i might add. The lamination line is cool and i love the color. I added silver grey paracord which comments the blade color well.
average rating 100%
Truely great tiny knife 08/07/2017
By Derek
I currently own a ZDP manbug and im glad i got the ladybug because they are very different knives due to one reason... blade thickness. This is like a kershaw leek or benchmade mini onslaught in that one should never pry anything with this knife. I tied paracord to the end for a pinky purchase to both of these mini knives. I held up five strips of cardbord and it went through its blade lengths worth of thickness very easily because its just so thin like an opinel. If you want a scalpel or exacto get the ladybug. If you want a thicker edge and tip and spine get the manbug. There are far better reviews on youtube than what i have words to say on here, but the toughness of both steels made me glad igot them in my pair as zdp is stronger and harder its thicker in the Mb, and my love of M4 and high speed steels can now go with me everywhere with my LB. not sure if they all are but my ladybug spine is not finished well and the grind line cuts into the stock thickness. But that could be mine
Spyderco Ladybug 3 LBORP3E - Sprint Run - Serial Number - BNIB - 2016 Spyderco Ladybug 3 LBORP3E - Sprint Run - Serial Number - BNIB - 2016 SKU: SP-LBORP3E Price: $0.00
Limited Spyderco Ladybug 3 Knife, 1.9" HAP40 SUS 410 laminate blade; burnt orange FRN handle, 2.48" closed. Discontinued Sprint Run with serial number, BNIB; made in Japan in 2016.