• AccuSharp Sharpener: AccuSharp Knife and Tool Sharpener, White, AS-1

AccuSharp Sharpener: AccuSharp Knife and Tool Sharpener, White, AS-1

AccuSharp Sharpener: AccuSharp Knife and Tool Sharpener, White, AS-1
Average rating:
1 reviews
Read all reviews
$8.97 Reg. Price $14.50  
AccuSharp Knife and Tool Sharpener, tungsten carbide sharpening blades, molded white plastic handle with finger guard.
Pin It

AccuSharp Sharpener: AccuSharp Knife and Tool Sharpener, White, AS-1


The illustrated AccuSharp Sharpener is the AccuSharp Knife and Tool Sharpener, designed to sharpen kitchen knives, pocket knives, hunting knives, cleavers, machetes and more. The AccuSharp Knife and Tool Sharpener has two reversible and replaceable diamond honed tungsten carbide sharpening blades, set into a white molded plastic frame. This AccuSharp Sharpener has an ambidextrous ergonomic handle area with a full length finger guard for safety, and a hole for hanging, or for a lanyard. The AccuSharp will not rust, and can be cleaned with soap and water, or in the dishwasher. The AccuSharp Knife and Tool Sharpener with White handle has an overall length of 5 1/2". Proudly made in the USA.

Please note: the AccuSharp Knife and Tool Sharpener is not designed to sharpen scissors.

AccuSharp tungsten carbide replacement blades (AS-3) are available; sold separately.

AccuSharp Sharpener: AccuSharp Knife and Tool Sharpener, White, AS-1

KNIVES PLUS ® Home

BRANDAccuSharp
PRODUCT TYPESharpeners
PRODUCT CATEGORYPull-Thru
OVERALL LENGTH5.5"
ORIGINUSA
Product Field 375595
Product Field 3801394
AVERAGE RATING100
NUMBER OF REVIEWS1
AccuSharp Sharpener: AccuSharp Knife and Tool Sharpener, White, AS-1
Average rating:
1 reviews

Write a review | Read all reviews

Featured Reviews:

AccuSharp Sharpener: AccuSharp Knife and Tool Sharpener, White, AS-1
A GREAT TOOL !!!!!!
By 
THESE ARE MADE IN TEX & HAVE BEEN USING MINE A LOT, OVER THE PAST 5 YEARS. ESPECIALLY AS AN "EDGE UNIFORMER" FOR THOSE BLADES THAT HAVE NICKS, CHIPS, OR SEVERE ROLL-OVERS. USUALLY REQUIRES ON A FEW STROKES & THEN SWITCH TO ANOTHER TOOL TO "COUNT THE STROKES" !!!! THIS TOOL WORKS VERY WELL WHEN SHARPENING BLADES SUCH AS MACHETES, SWORDS, KHUKURI, & GARDEN HOES. CLAMP THE BLADE EDGE UPWARD & LEVEL FROM SIDE TO SIDE IN A PADDED BENCH VISE. SCRAPE THIS SHARPNER ALONG THE EDGE UNTIL IS BEGINS TO GET SHARP. THEN FINISH UP WITH A FINER DEGREE OF SHARPENING TOOL. WHEN THE CUTTERS GET DULL, SIMPLY UNSCREW THE HANDLES, ROTATE THE CUTTERS 180 DEGREES, & REINSTALL THE HANDLES---BAM, IT'S READY TO GO FOR SEVERAL MORE YEARS !!!!!!!! A REALLY GREAT TOOL FOR BEGINNERS------OOORAH.
 

Related Items: